2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

2001 1500 4x4 trans issue

Thread Tools
 
Search this Thread
 
Old Feb 12, 2013 | 10:53 AM
  #1  
rockyram's Avatar
rockyram
Thread Starter
|
Registered User
Joined: Feb 2013
Posts: 5
Likes: 0
Default 2001 1500 4x4 trans issue

i have a 2001 ram 1500 4x4 with the 360 magnum. i am having trouble with my transmission. ok here is the deal. when i start my truck up and its not warmed up it doesn't shift out of first. but if it does it'll slip into neutral. it also does it after shut off and turn back on to drive within an hour. when it is warmed up it shifts but shifts only at certain speeds. 12, 28, 42, and finally 50. when it shifts it shifts kinda hard. can someone please help me with some input. thanks


Posted from Dodgeforum.com App for Android
 
Reply
Old Feb 12, 2013 | 11:13 AM
  #2  
stewie01's Avatar
stewie01
Legend
Joined: Mar 2011
Posts: 8,914
Likes: 4
From: Fredericksburg, Virginia
Default

Probably wouldn't hurt to check the trans fluid level first. Check with truck at normal operating temperature and the transmission in N.
 
Reply
Old Feb 12, 2013 | 12:26 PM
  #3  
rockyram's Avatar
rockyram
Thread Starter
|
Registered User
Joined: Feb 2013
Posts: 5
Likes: 0
Default

i have changed the filter and replaced the fluid. still has not helped


Posted from Dodgeforum.com App for Android
 
Reply
Old Feb 12, 2013 | 01:11 PM
  #4  
stewie01's Avatar
stewie01
Legend
Joined: Mar 2011
Posts: 8,914
Likes: 4
From: Fredericksburg, Virginia
Default

Was there any debris in the fluid or on the magnet? Some greyish looking crap on the magnet is normal, large chunks of metal aren't.
 
Reply
Old Feb 12, 2013 | 02:26 PM
  #5  
rockyram's Avatar
rockyram
Thread Starter
|
Registered User
Joined: Feb 2013
Posts: 5
Likes: 0
Default

there was the normal dusting but no large chunks. my check engine light is on but no codes show up when tested


Posted from Dodgeforum.com App for Android
 
Reply
Old Feb 12, 2013 | 06:27 PM
  #6  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,480
Likes: 4,223
From: Clayton MI
Default

How many miles on it?
 
Reply
Old Feb 12, 2013 | 09:09 PM
  #7  
gdstock's Avatar
gdstock
Legend
Joined: Jul 2011
Posts: 8,259
Likes: 4
From: Austin, TX
Default

Originally Posted by rockyram
there was the normal dusting but no large chunks. my check engine light is on but no codes show up when tested


Posted from Dodgeforum.com App for Android

If a CEL is lit, there is a code. Check with another scanner.
 
Reply
Old Feb 12, 2013 | 09:32 PM
  #8  
rockyram's Avatar
rockyram
Thread Starter
|
Registered User
Joined: Feb 2013
Posts: 5
Likes: 0
Default

154k. it started doing it around 139k. and i have tried multiple scanners even high end scanners


Posted from Dodgeforum.com App for Android
 
Reply
Old Feb 12, 2013 | 09:38 PM
  #9  
gdstock's Avatar
gdstock
Legend
Joined: Jul 2011
Posts: 8,259
Likes: 4
From: Austin, TX
Default

Have to read stored codes, not just active codes. Don't know how many drive cycles a Ram takes to clear memory, but it is possibly quite a few.
 
Reply
Old Feb 12, 2013 | 09:41 PM
  #10  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,480
Likes: 4,223
From: Clayton MI
Default

While you were in the pan, did you have a look at the governor pressure sensor/solenoid?
 
Reply



All times are GMT -4. The time now is 10:14 PM.