not doing timing set. i barely had the spare cash to do the plenum. i live by the "if it aint broke dont fix it" motto.

 

Print it out, mark what can be deleted and email it to me. I can do it.

 

You're supposed to make the "new guy" do it

 

think you can delete post 615-622, 569-613 and maybe some of the other many posts It's Me Patt made

 

if you have more than about 75-100K miles on your engine - your factory chain is shot and you don't know it yet.

label all your wires, bolts, hoses. take pictures. take your time. leave the fuel rail on the intake. leave the TB on if you can. i can't remember whether you can or not. you'll need the 3/8 inch fuel line removal tool. the $5 plastic one is fine.

when reinstalling the intake, cut the heads off 4 bolts and thread them in the 4 corners to act as alignment pins.

 

Where? I also need to do mine.

 

Just go to ebay and type in "Dodge ram plenum plate" and you will see his kit listed.

 

The timing chain is only about 50 bucks. It would REALLY REALLY good for your truck if you could scrape up the money somewhere if at all possible

 

Plus another 25 or so for gaskets.

 

http://www.ebay.com/itm/DODGE-JEEP-ALUMINUM-PLENUM-PLATE-BELLY-PAN-318-360-5-2-5-9-MANIFOLD-REPAIR-KIT-/190807905296?pt=Motors_Car_Truck_Parts_Accessories&hash=item2c6d099410&vxp=mtr