01 Ram "Blue Duece" Build thread!
1999blkdakrt is the one that sells the throttle bodies on here. as for larger injectors... you dont really need them. the oe injectors are 23.6lbs at 49 psi. if you get the red injectors, they are 25.1lbs at 49 psi.
good for you, for rebuilding the beast! i recently did a top end built 360 swap. im putting out somewhere around 400bhp.
good for you, for rebuilding the beast! i recently did a top end built 360 swap. im putting out somewhere around 400bhp.
Thread Starter
|
Registered User
Joined: Aug 2013
Posts: 6
Likes: 0
From: philadelphia
alright gentleman,
No progress as of yet, just been working on cleaning the parts im re-using. I will deffinitely be picking up a set of the odessa heads, along with 1.7 HS roller rockers to throw in there. i already have a small cam installed in the truck. Along with a double roller timing set.
So at this point i just ordered a set of rings, rod bearings and oil pan gasket from rock auto. Hopefully i can afford to order the roller rockers this paycheck... but we shall see
Thanks for stopping by
Regards
No progress as of yet, just been working on cleaning the parts im re-using. I will deffinitely be picking up a set of the odessa heads, along with 1.7 HS roller rockers to throw in there. i already have a small cam installed in the truck. Along with a double roller timing set.
So at this point i just ordered a set of rings, rod bearings and oil pan gasket from rock auto. Hopefully i can afford to order the roller rockers this paycheck... but we shall see
Thanks for stopping by
Regards
