2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

stalling problem

Thread Tools
 
Search this Thread
 
  #1  
Old 10-01-2005, 05:20 PM
01sport's Avatar
01sport
01sport is offline
Thread Starter
Join Date: Oct 2005
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default stalling problem

I have a 2001 dodge ram sport 1500 that I bought almost a year ago, it has 72,000 miles on it.
yesterday it started stalling on me whenever I would slow down or stop the rpm's would flutter then drop and stall, it only did this after the engine warmed up.
now this morning I changed the air filter and replaced the pcv valve and it didnt help any.
i'm leaning towards it being the o2 sensor but i'm really not sure.
any suggestions on what it could be?
thank you
Brian
 
  #2  
Old 10-02-2005, 11:09 PM
dodgebeater38's Avatar
dodgebeater38
dodgebeater38 is offline
Join Date: Oct 2005
Location:
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default RE: stalling problem

mine did sumthin like that and it was a week battery and altinator problem
 
  #3  
Old 10-16-2005, 12:04 AM
rebelgtp's Avatar
rebelgtp
rebelgtp is offline
Registered User
Join Date: Sep 2005
Posts: 21
Likes: 0
Received 0 Likes on 0 Posts
Default RE: stalling problem

i'm having a similar issue with my 95. do you have any problems starting your truck back up if you let it sit for a few minutes after you had it running and warmed up?
 
  #4  
Old 10-16-2005, 02:52 AM
QuadCab318's Avatar
QuadCab318
QuadCab318 is offline
Rookie
Join Date: Oct 2005
Location:
Posts: 69
Likes: 0
Received 0 Likes on 0 Posts
Default RE: stalling problem

go read rebelgtp's problem https://dodgeforum.com/m_287321/tm.htm
 
  #5  
Old 10-17-2005, 12:25 AM
steve05ram360's Avatar
steve05ram360
steve05ram360 is offline
Hall Of Fame
Join Date: Jan 2004
Posts: 12,827
Received 235 Likes on 218 Posts
Default RE: stalling problem

sounds like a dirty throttle body and IAC valve. pull the TB and give it a good cleaning and make sure the small air passage ways are free of dirt and are clean. then clean the IAC valve and make sure it's in good opperating condition. you might want to spray a dab of oil on the shaft to make sure it can adjust easily and not stick.
 
  #6  
Old 10-17-2005, 06:34 PM
01sport's Avatar
01sport
01sport is offline
Thread Starter
Join Date: Oct 2005
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default RE: stalling problem

it was the crankshaft positioning sensor, it was a 95 dollar part.
 



Quick Reply: stalling problem



All times are GMT -4. The time now is 06:28 PM.