Fog Light Retrofit
#1
Fog Light Retrofit
As some of you may know, trucks that did not come with fog lights from the factory came without fog light mounts and wiring. The fog light holes in these trucks were also substantially smaller than those with fog lights. Before knowing this i bought a set of fog lights and was determined to make them work. Some minor modifications and here ya go:
1. Fog light next to hole where it must go:
2. Light fixture cut with hacksaw to accommodate the fog light in the housing:
3. Fog light in housing:
4. Fog light in housing in bumper: (used standard bolts to mount)
5. Again:
6. Finish Product: (the fog light bulbs are hyper white, making the headlights appear dim)
Feel free to comment/ask questions.
1. Fog light next to hole where it must go:
2. Light fixture cut with hacksaw to accommodate the fog light in the housing:
3. Fog light in housing:
4. Fog light in housing in bumper: (used standard bolts to mount)
5. Again:
6. Finish Product: (the fog light bulbs are hyper white, making the headlights appear dim)
Feel free to comment/ask questions.
#4
#5
#7
Trending Topics
#8
correct me if im wrong, but if that connects to the high/lo beam switch ( the switch in the cab next to OD) those would be driving lamps, and the fog lights would actually be on a seperate switch and go into the square holes???? sorry for being mr. technical.. im really bored at home.. haha
#9