A while back my pinion nut fell off and my driveshaft landed on the highway, so i picked it up and drove home. Fast forward, I have a different rear dif, and I'm missing my output yoke off my transfercase, and the only thing I can seem to find online are "slip yoke eleminator kits", and I'm not really looking to spend $150 on that.

Does anyone have any information as to where I can obtain a new output yoke for a NP231 D? Parts houses here have nothing nor do they know where they could get one.

Junk yards here are all 4x2's.

This is the last thing i need to get my truck back on the road, so any help would be GREATLY appreciated.

 

http://www.ebay.com/itm/like/161200836068?lpid=82
or new

http://www.dennysdriveshaft.com/p560...se_slip_y.html

 

i guess my google-foo is week because I've searched for hours and never came up with the part I needed.

 

I notice the new one says 27 spline, I thought ours were 32?

 

must of copied wrong link, you do need a 32 spline. Look on their website, they have 32 spline also.

 

Any idea how they differ from the splines on a 2wd auto? I haven't counted the splines yet but I think the shaft diamter might be smaller. reason I ask is I KNOW where one of those are

 

I don't believe they have the same spline count, but I've been wrong many times before. Go look at it and count the splines.

 

out of curiosity and lazyness, are these 1310's?

 

U-joints are 7290. For what you have going on you should look for 1410 yoke, DS and pinion 1410 yoke switch it all up.