Have 5.2 sealed power pistons h814p .030 318 eq iron ram heads with stock size valves .need head gasket. want to atleast keep stock compression thanks

 

What combustion chamber volume on your new heads?

 

The heads shoud be stock not sure what cc. have to call odessa tomorrow .just got them today thanks.

 

Listings I find for those are 2.02/1.625 valves, and 62cc combustion chambers..... I am having trouble coming up with a number for the stock heads...... can't be too much different though..... I think at most, you will bump compression ratio by less than half a point.

 

Hi. thanks for the help .i had odessa put stock valves in .not 020 I called said 62cc.heads thanks

 

What head gaskets .Thicknes.054. 039 047 orthinner. thaanks. don't want to blow head gaskets.

 

Go with whatever stock thickness was. Should work just fine.

 

Thanks . I think the stockgaskets are 047. Shoud i use orig mopar or felpro. thanks

 

Felpro makes good gaskets. Probably cheaper than ma mopar too. I have never had a problem with fel-pros.

 

Thanks.heyyou your the only one replying thanks