When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
I have seen different style sway bar links for the 2nd gen trucks, which would imply at least two different style sway bars. It would be helpful for someone to post a photo of their front sway bar setup off their ORE truck to alleviate confusion and provide clarity to this topic.
the link on a reg.4x4 is straight,where the ore is straight on top where it connects to the sway bar and at a angle where it connects to the axle..
the link on a reg.4x4 is straight,where the ore is straight on top where it connects to the sway bar and at a angle where it connects to the axle..
Sounds like the way mine is setup on my '96 Ram 2500 4x4. The bottom is a right angled ball joint type of connection at the axle and the top is straight. I had no issue finding replacement sway bar links at my local Pep Boys. I do recall that there were two different styles of sway bar links - ones like mine and straight ones.
Based upon those photos, looks to me as if 2WD trucks use the straight sway bar link setup and 4WD trucks use the lower 90 degree ball joint style sway bar link setup.
Based upon those photos, looks to me as if 2WD trucks use the straight sway bar link setup and 4WD trucks use the lower 90 degree ball joint style sway bar link setup.
thanks for the help//yes i need the whole sway bar with the lower 90 degree ball joint style...
the previous owner pulled off the sway bar...but i cant tow due to the body sway when breaking down a hill.my truck is a beast when it tows but i need a sway bar bad...thanks to all for your help...