2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Front driveshaft ?

Old Nov 8, 2014 | 01:58 PM
  #1  
getdown78's Avatar
getdown78
Thread Starter
|
Veteran
Joined: Dec 2012
Posts: 468
Likes: 0
From: Colorado
Default Front driveshaft ?

My 96 R1500 ex cab has 5 in lift but is the front shaft in a bad angle with that much lift ?
 
Reply
Old Nov 8, 2014 | 03:05 PM
  #2  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,366
Likes: 4,209
From: Clayton MI
Default

Measure it, and see. Keep in mind, the suspension moves. Jack up the front to basically unload the front suspension, measure your angles that way. See if anything is binding at full droop. If not, you are probably ok.
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 12:04 AM.