20x12's in 35's with a three inch body lift?
Thread Starter
|
Registered User
Joined: Jan 2016
Posts: 1
Likes: 0
20x12's in 35's with a three inch body lift?
i have a 1997 dodge ram 4x4 with a three inch body lift, how much rubbing would i have if i put on some 20x12's wrapped in 35's? or should i go with 33's? thanks
Administrator
Joined: Apr 2010
Posts: 87,483
Likes: 4,223
From: Clayton MI
1500? 2500?
On a 1500, 3" body lift is gonna be tight with 35's, and with the probably 3.55 gears, it's gonna be a dog..... 33's would be a better plan.
On a 2500, 3" lift will be fine with 35's, but, you still probably have the 3.55 gears, and yep, that'll make it a real dog off the line.
Welcome to DF!
On a 1500, 3" body lift is gonna be tight with 35's, and with the probably 3.55 gears, it's gonna be a dog..... 33's would be a better plan.
On a 2500, 3" lift will be fine with 35's, but, you still probably have the 3.55 gears, and yep, that'll make it a real dog off the line.
Welcome to DF!
Veteran
Joined: Feb 2015
Posts: 315
Likes: 0
From: CA
with no suspension lift id stick with 33's but id pair 33s with some 4:10s. if your going for 35s get an actual lift and swap gears to 4:56. in my opinions i wouldnt go much above stock if your not gonna replace the gear ratio too. youll hate life if you dont.