When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
My 4x4 for some reason will only engage in 4 Low not 4 High, the shifter does feel like it engages and the linkage is fine from what I can see underneath. any ideas?
Then the vacuum system is your problem. Check and see which port is getting vacuum at the cad. (on the front axle.) should be the inboard port. May just have a leak somewhere.
4x4 only works in low
