2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Whining noise

Thread Tools
 
Search this Thread
 
Old Apr 28, 2016 | 09:33 AM
  #1  
David Clauder's Avatar
David Clauder
Thread Starter
|
Professional
Joined: Sep 2015
Posts: 143
Likes: 0
Default Whining noise

I have a weird whining noise from under my truck at first I thought it might be from my starter since its been messing up on me and the solenoid is going out as well as hearing the teeth from the starter and the flywheel which made me think maybe the wheel on the starter is going bad also but I found a video of a guy diagnosing bad pinion bearings in the rear Axel and since my pinion seal is bad cause the u joint and saddle is wet as well as the bottom corner of the gas tank that it might be that. Figured I'd ask some opinions since I'm getting busier at work now and don't have alot of time to play around. Just need it fixed....
 
Reply
Old Apr 28, 2016 | 09:36 AM
  #2  
David Clauder's Avatar
David Clauder
Thread Starter
|
Professional
Joined: Sep 2015
Posts: 143
Likes: 0
Default

Not the axle but the differential....
 
Reply
Old Apr 28, 2016 | 11:15 AM
  #3  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,399
Likes: 4,214
From: Clayton MI
Default

When do you hear the noise?
 
Reply
Old Apr 28, 2016 | 11:17 AM
  #4  
David Clauder's Avatar
David Clauder
Thread Starter
|
Professional
Joined: Sep 2015
Posts: 143
Likes: 0
Default

After I get up around 40+ and it's only really noticeable when I accelerate
 
Reply
Old Apr 28, 2016 | 11:18 AM
  #5  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,399
Likes: 4,214
From: Clayton MI
Default

Yeah, that sounds a lot like a pinion bearing. If you catch 'em quick, you can just do the outer, and seal, and call it a day. Leave it too long, and it can get REALLY expensive. How long is too long? That is a very good question, and there is no good answer for it.
 
Reply




All times are GMT -4. The time now is 12:00 PM.