HUH...no heat/ac/ "nada" ????
Thread Starter
|
Rookie
Joined: Sep 2011
Posts: 63
Likes: 0
From: San Diego,Ca
HUH...no heat/ac/ "nada" ????
Jus started up the truck one morn...nothing
All was fine the day before.
fuse is good.
hot wired the blower motor...its good
checked power to the control panel/module,on the dash,got power.
What a you guys think ?
control panel,resistor,or actuator ? or somethin else
Do I have to just start replacing parts ????
98 1500 mag,auto
All was fine the day before.
fuse is good.
hot wired the blower motor...its good
checked power to the control panel/module,on the dash,got power.
What a you guys think ?
control panel,resistor,or actuator ? or somethin else
Do I have to just start replacing parts ????
98 1500 mag,auto
Administrator
Joined: Apr 2010
Posts: 87,461
Likes: 4,219
From: Clayton MI
The heater switch only provides ground path for the blower, so, check the gound. 
(since you have power TO the switch) You are looking for ground 201, instrument panel right center support.
(since you have power TO the switch) You are looking for ground 201, instrument panel right center support.
