2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

1996 2500 with 5.9 gas, need advanced help

Thread Tools
 
Search this Thread
 
  #1  
Old 05-08-2017, 02:08 PM
greg96ram's Avatar
greg96ram
greg96ram is offline
Registered User
Thread Starter
Join Date: May 2017
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default 1996 2500 with 5.9 gas, need advanced help

1996 Dodge Ram 2500 4x4 with 360 V8. Will not start. No spark or injector pulse. Cam and crank reference are good. Replaced ECM. Cleaned up grounds. Ignition coil test good. Has new distributor. What am I missing?
 
  #2  
Old 05-08-2017, 02:34 PM
HeyYou's Avatar
HeyYou
HeyYou is offline
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 81,518
Likes: 0
Received 3,270 Likes on 3,017 Posts
Default

Are you getting power to the coil and injectors? You will only see it for about three seconds after turning the key on, unless the PCM sees the motor turning.

Does the fuel pump prime when you first turn the key on?
 
  #3  
Old 05-08-2017, 02:39 PM
greg96ram's Avatar
greg96ram
greg96ram is offline
Registered User
Thread Starter
Join Date: May 2017
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default

Fuel pump does prime. No power at coil.
 
  #4  
Old 05-08-2017, 03:10 PM
HeyYou's Avatar
HeyYou
HeyYou is offline
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 81,518
Likes: 0
Received 3,270 Likes on 3,017 Posts
Default

Swap the ASD relay for another one. Most of the relays in the PDC are pretty much the same, so, the horn relay should work. (provided your horn works. )
 




All times are GMT -4. The time now is 11:54 PM.