When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
New pump and straps they disenagrated but the problem is still their starting to think plenum gasket because it does burn oil and my intake is total coated in oil so im takeing the top end apart and going to find out...... its been almost a month with no truck cant wait to get this solved
V-10 doesn't have a plenum gasket. That's just the gas sixes, and eights. Could be the PCV system....... Don't recall if there is an actual valve, or if its just an orifice tube on these.
I would consider a leaky valve cover gasket. As I recall there is just an orifice for the pcv. Installing a breather cap will remove pressure in the engine.