2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

truck want start

Thread Tools
 
Search this Thread
 
Old Dec 11, 2017 | 05:25 PM
  #1  
tlspann's Avatar
tlspann
Thread Starter
|
Registered User
Joined: Dec 2017
Posts: 1
Likes: 0
Default truck want start

2001 dodge ram 1500 2 wheel drive 3.9 liter engine. It turns over, has fire to all plugs but want start. I get a p0601 code. check battery and I only have 9.6 volts coming out of the battery, is this the cause?
 
Reply
Old Dec 11, 2017 | 05:53 PM
  #2  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,399
Likes: 4,214
From: Clayton MI
Default

Moving to correct section.

The 601 code says there is a problem with the PCM. The low voltage may be due to you trying to start it for a while, or, may indicate some other problem. I suspect you are going to need to replace the PCM for starters...... put a charge on the battery, and take it from there.
 
Reply




All times are GMT -4. The time now is 03:33 PM.