Factory infinity tweeter wiring?
Thread Starter
|
Professional
Joined: Nov 2017
Posts: 152
Likes: 0
Factory infinity tweeter wiring?
Hey all, I deleted the factory amps because it was the only way to get the door speakers to work again since the ground for the amp was cut short and I couldn’t fix it. Been this way for a few weeks, I just took the door panel off to see how I can get the tweeters to work but nothing I tried seemed to power them up. Anyone done this kind of thing before? What have you done to get the tweeters back?
Administrator
Joined: Apr 2010
Posts: 87,458
Likes: 4,218
From: Clayton MI
Tweeters get their signal from the amps on the door speakers.
Left side: Yellow/Red is feed, Yellow/Black is ground. (both go to/come from the amp on the door speaker.
Right side: Light Blue/Red is feed, Light Blue/Black is ground.
Left side: Yellow/Red is feed, Yellow/Black is ground. (both go to/come from the amp on the door speaker.
Right side: Light Blue/Red is feed, Light Blue/Black is ground.
Thread Starter
|
Professional
Joined: Nov 2017
Posts: 152
Likes: 0
since I got rid of the factory amps against my will (previous owner cut wires too short couldn’t fix ten and door speakers didn’t work) how would I go about making them work again? I like having my separate highs mids and lows.
Administrator
Joined: Apr 2010
Posts: 87,458
Likes: 4,218
From: Clayton MI
Tap into the speaker feed, put a choke on it to filter lower frequencies, run new wires to tweeter. (or, to wherever you can conveniently splice into them.)
