When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
My 97 dodge ram 1500 gear lever is really loose when switching gears, if its in drive and I hit a bump itll pop into second or neutral. Whats wrong and how can I fix it?
Check the linkages. The bushings tend to wear out.
I took the bottom part of my dash off under the steering wheel and there a hook think that changes the gear but it's super loose so I figured that was the problem I just don't know jot to tighten it
That's just for the gear indicator in the dash. I don't even pay any attention to mine. I just count the clicks when I shift. You need to check the linkage from the bottom of the column, to the trans.
That's just for the gear indicator in the dash. I don't even pay any attention to mine. I just count the clicks when I shift. You need to check the linkage from the bottom of the column, to the trans.