2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

46RE interchange

Thread Tools
 
Search this Thread
 
  #1  
Old 01-27-2020, 06:25 PM
TAdams32's Avatar
TAdams32
TAdams32 is offline
Registered User
Thread Starter
Join Date: Jan 2020
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default 46RE interchange

I have a 96 ram 1500 318 with 2 wheel drive. Will a 46RE from a 2001 interchange.
 
  #2  
Old 01-27-2020, 09:12 PM
HeyYou's Avatar
HeyYou
HeyYou is offline
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 82,514
Likes: 0
Received 3,388 Likes on 3,128 Posts
Default

Yes and no. The trans will bolt right up, the problem is, it won't have the provision for the vehicle speed sensor in the tailshaft, the internal electronics are also not compatible with the 96 PCM. For a direct swap, you need a trans from a 96 or 97 2wd truck, with a V-8. VSS went away in 98.... You *might* be able to swap your tailshaft onto the replacement trans, but, I don't know if the output shaft on the newer trans will even have provisions for the VSS drive gear... and if you are going to go so far as to swap output shafts, you might just as well rebuild the trans.... as that shaft is the last part to come out.
 
  #3  
Old 01-28-2020, 01:37 PM
TAdams32's Avatar
TAdams32
TAdams32 is offline
Registered User
Thread Starter
Join Date: Jan 2020
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default

Thanks for the info. May just spend 1500 for a rebuild. Didn't pay but 1200 2 years ago.
 
  #4  
Old 01-28-2020, 04:46 PM
HeyYou's Avatar
HeyYou
HeyYou is offline
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 82,514
Likes: 0
Received 3,388 Likes on 3,128 Posts
Default

That would likely be the best plan.
 



Quick Reply: 46RE interchange



All times are GMT -4. The time now is 04:51 AM.