gotcha ill stick with stock than, and ill definitely look for some of those gaskets them

 

The injectors are good up to 400hp I should be around 380hp when I'm done

 

Progress has been quite slow on this unfortunately but I talked to comp cams and was told to go with this cam:

Xtreme Energy Computer Controlled 216/224 Hydraulic Roller Cam for Chrysler Magnum'

What do you guys think of the recommendation? anyone have any experience with this cam, and will I still be keeping lower end torque

Also I've been told that comp dosent carry springs that work with magnum heads, they suggested Hughes for springs, will Mopar Performance springs work as well? what's everyones recommendation for springs

 

I can't find a good spec sheet for that one, got a link?

 

https://www.summitracing.com/parts/cca-20-746-9

 

Yeah, that should idle smooth, and give you GOBS of low end torque.

 

perfect, thank you kind sir

 

Damn I should have went with that one I think I lose low end with mine

 

HeyYou is a Mopar God. Honestly he is very knowledgeable

 

I've been doin' this kind of thing for WAY to long......... At last the nightmares have stopped....... Last night, I had dreams of being crushed by falling tree limbs..... Might have had something to do with 12 hours cutting BIG trees on Saturday. (no buildings or people were harmed in that exercise, though one guy DID try and impale me with a limb...... sometimes, I can STILL move quickly. )