Project Completed: Double Din, Amp/Sub Under Front Seats, Redneck Sound Insulation
#11
I do not think they will fit. The rear seat is very nearly flush against the back wall when the rear seat is down.
#12
I modded it so the back folds down and moved the seat forward 1/2" I have to get measurements but like you don't want to lose the under seat tray.
The following users liked this post:
1SaltyGreenBean (12-21-2020)
#13
Yeah I didn't want to lose that storage either, which is why I went with with under the front seats for the amp and sub. I also added a BakBox to my Bakflip bed cover, so I am able to carry a lot of items there as well.
#14
You have a picture of that? Yeah I store done stuff behind the rear seat to. Aren't you the one that put the 5th gen emblem in the hood?
#15
https://bakindustries.com/cache/imag...3_h500_q80.jpg
No, I don't have a different emblem.
#16
Here's a good pic of a bakbox. It hangs on the tracks of the cover, and isn't visible from the outside if the cover is closed. It's a nice solution.
https://bakindustries.com/cache/imag...3_h500_q80.jpg
No, I don't have a different emblem.
https://bakindustries.com/cache/imag...3_h500_q80.jpg
No, I don't have a different emblem.
#17
Double din bezel
#18
Brand is PAC and part number is CDK665. I think I got the last or 2nd to last one that the ebay seller had. Might just have to be patient and check the interwebs now and again to find them in stock somewhere.
The following users liked this post:
Spillage (12-24-2020)
#20