When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
I tried to find a gantry like they use in the junk yards around here. They use car tires so it would roll on the grass very well. I have to figure it out soon because it’s ready to come out.
So this “warmer” was disconnected by previous owner. I live in central Virginia. Would you replace it? Gets to 100+ In the summer and down to 20’s in winter.
Is that a block heater? (heats coolant..... likely has an electrical cord?) If so, up to you. It is pretty nice to get into your truck in the really cold temps, start it up, and instantly have heat......
Is that a block heater? (heats coolant..... likely has an electrical cord?) If so, up to you. It is pretty nice to get into your truck in the really cold temps, start it up, and instantly have heat......
i didn’t see any cord. The rad hoses where cut like that before I got it. Has 2 transmission lines that screw in the bottom. Would be cool if it is what you say. I know it has a oil heater with a long cord on the side of the block.
Big day. Got the motor out and inside my shed. The plywood held up across the grass. Thanks to the lift having 6 wheels. Getting it out the compartment was the worst part. The motor mounts didn’t want to cooperate. But cleanings starts tomorrow. Cylinders look great. Bearings looked great. Not bad for a rookie 😂