R46h Rebuild
Thread Starter
|
Professional
Joined: Mar 2021
Posts: 190
Likes: 1
So what you're saying is I need to go to a dealership and get that part and I mean if I go to a Chrysler place which there is one here in Greenville Texas I just tell him I need a CPS sensor for a Dodge truck..(and of course the model etc) and I wanted to be an original Mopar part...
Legend
Joined: Nov 2014
Posts: 8,098
Likes: 318
You can do it that way or find it online (cheaper). Be warned done aren't genuine MoPar parts
Thread Starter
|
Professional
Joined: Mar 2021
Posts: 190
Likes: 1
Okay running into a setback... I cannot find a salvage transmission. So here's my new issue... I have the transmission out, I found a transmission shop in town that will rebuild it for $1,000. IF HE DOESN'T FIND ANYTHING"CRAZY" inside the transmission... SO HERE'S MY QUESTION IF HE REBUILDS THAT TRANSMISSION OUT OF THE TRUCK HOW'S HE GOING TO ADJUST THE BANDS AND EVERYTHING AND CHECK THE PRESSURES ON ALL THE PORTS?
Veteran
Joined: Jan 2017
Posts: 474
Likes: 41
From: Imperial Beach CA
He will adjust the bands when it's out. Easier to do. Once its all together there are ports that allow him to apply pressure to see the plates move. If there are problems after its in the truck then you start to pressure test then. I've put in rebuilt transmissions and have rebuilt 10+ on different brands of vehicles. I haven't had a problem yet with pressure or the vehicle moving. I've done some stupid things I had to re-fix though.
Thread Starter
|
Professional
Joined: Mar 2021
Posts: 190
Likes: 1
Okay, Great... I have made arrangements to get it to this man's shop. However I AM STILL going to find a transmission that'll fit and I AM DETERMINED to build a BRUTE for this application! I'm by no means through needing this forum or the expert/professional knowledge I have already received and WILL need in the near future, because, as soon as this Truck is on the road I am expanding my search for a salvage tranny to a 200 mile radius if necessary.
Thread Starter
|
Professional
Joined: Mar 2021
Posts: 190
Likes: 1
I in fact found a transmission in Canton Tx. (Carparts.com) about 45 miles away, for $500.00 (IF) it's still there... Waiting on a reply now. ... HOWEVER... THE MILEAGE IS ADVERTISED AS333, 000 MILES...That seems like a LOT of miles, even for a temporary hook-up while I Rebuild... Is that a Correct assumption you think.?