Power Lox work on both sides but not windows and mirrors. First, windows were only working when truck was running then they stopped working altogether then started working next day after starting truck during entire drive but since that ride, they have not worked at all.
Problemz all started when I disconnected negative battery cluster to battery for 15 mins then reconnected, I was simply doing this cuz I had chgd out my iac valve.

 

What year truck?

 

It's a 97 dude.

 

Grab the service manual for your truck from here. Wiring diagrams are in section 8W.

I think mirrors are supposed to be hot at all times??? Maybe? Windows with key in Acc, or Run. Circuits on yours are pretty straightforward, so, the problem should be too difficult to find.

 

Check your driver side switch the wires were it connects wire to pong if it's broke just weld it back together

 

I will check that, thanx.

 

Welcome if you want a pic or video lmk remember check you're fuse and relays and flash fuses

 

That wld be great, if u have a vid. Ign/acc fuse under hood n circbrkr on dash side loI t be fine. Wires all look to be fine at prong dir under pwr window switches on door side. Mirr switch also does not work so gotta believe it is sthing at door jam. Trying to find which wires and what to test for, at door jam.

 

Grab a service manual for your truck from here. Wiring diagrams are in section 8W.

 

If only 1 of the wires came out of the window switch, can I shove it back in the terminal & drop some solder on it?