When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
Also be aware it takes a few minutes for the modules to go to sleep. You have to clamp the door ajar switches shut so it doesn't think the doors are open
that last part of all of it when the fuse box in the engine compartment is on is just with a test light showing power across all the fuses even though the battery isn’t grounded.
You need to to do the draw test with the battery disconnected(one of the terminals). You put a multi meter in line with the terminal and the battery and it will tell you what the draw is. It is set to the milivolt scale so a test light is not going to cut it. Plenty of videos on youtube that show you how to do it.
11-19-2021, 05:55 AM
