When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Bucking on highway 40mph, CEL always illuminated pulled codes p300 through p308
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
Check to see if the 'cat' is clogged. Sounds like what you're describing. Remove the upstream o2 sensor n see if the problem changes and/or do an exhaust pressure check.
How do I remove the O2 sensor or do an exhaust check ? Is this something I can do myself or does it have to be taken to a shop ?
It doesn't do it in cold while in 'P' seems to idle fine.
If you have the right size wrench, (or, a pipe wrench....) you can pull the O2 sensor yourself. They tend to be stubborn though..... Remove it, go for a drive. Run better?? (It'll be loud....)
If you have the right size wrench, (or, a pipe wrench....) you can pull the O2 sensor yourself. They tend to be stubborn though..... Remove it, go for a drive. Run better?? (It'll be loud....)
When I remove the O2 sensor, how will I know if the CAT is clogged ?