So i should find a cam that is just for the magnum motor?

 

I want decent power a real nasty sound to it. I want a lot of lope. Just dont know what to get

 

The cam you're planning on using is a mild street cam. Your brakes should operate fine. If you're not happy with their operation after the engine upgrades, you might want to consider adding a vacuum canister to store off vacuum when its needed.

 

Well im going to look for a cam thats for the magum and not a retro fit.

 

https://www.compcams.com/thumpr-227-...r-273-360.html what about this one here

 

That cam might also be for the LA style motor. Take a look at these Comp Cams that work in magnum engines - https://www.summitracing.com/search/...l-block-magnum

 

If you see (Cam for Chrysler 273-360) it's a LA style cam, Magnum is only 318/360. You may want to list some of the other things you have or plan to do. I choppy/lopey idle will kill vacuum. They are designed for power in the upper rpm range. So if you put on duel plane intake it won't work as well as a single plane. If you are not sure of something post your questions here.

 

Ill send my entire list i have so far in a minute and let everyone look it over!

 

Intake- https://www.scramspeed.com/products/...num-satin.html
Carbuetor- https://www.summitracing.com/parts/e...4aApkgEALw_wcB
Intake Spacer https://www.edelbrock.com/carburetor...olds-8715.html
Fuel Pressure Regulator https://www.jegs.com/i/Holley/510/12...EaAnnlEALw_wcB

Cam Snout Extension https://www.hughesengines.com/Index/...0&partid=22194
Cam https://www.compcams.com/thumpr-227-...r-273-360.html
Distributor conversion kit- https://www.scramspeed.com/products/...ck-magnum.html
Heads https://allcoastautos.com/dodge/new-...eads-pair.html
vacuum booster

 

That cam isnt the correct cam i know im still trying to find one. I cant find anything for the magnum thats going to give a lope or sound at all? Any suggestions?