95 magnum carb swap do i need a new brake booster?
Grand Champion
Joined: Feb 2015
Posts: 7,435
Likes: 578
Comp lists them but it's not easy to find the differences without reading the details.
Intake- https://www.scramspeed.com/products/...num-satin.html this is duel plane
Carbuetor- https://www.summitracing.com/parts/e...4aApkgEALw_wcB square bore 600 cfm (might opt for a spread bore)
Intake Spacer https://www.edelbrock.com/carburetor...olds-8715.html save your $
Fuel Pressure Regulator https://www.jegs.com/i/Holley/510/12...EaAnnlEALw_wcB
Cam Snout Extension https://www.hughesengines.com/Index/...0&partid=22194 this is for mechanical fuel pumps, Magnum timing chain covers don't have these
Cam https://www.compcams.com/thumpr-227-...r-273-360.html hydraulic roller that will work with both la/magnum "note you will need new roller lifters"
Distributor conversion kit- https://www.scramspeed.com/products/...ck-magnum.html this is fine, you have options for ignition, Might opt for MSD6A
Heads https://allcoastautos.com/dodge/new-...eads-pair.html some of the EQ heads and when they where made/prepped by are better than others
vacuum booster no link
Carbuetor- https://www.summitracing.com/parts/e...4aApkgEALw_wcB square bore 600 cfm (might opt for a spread bore)
Intake Spacer https://www.edelbrock.com/carburetor...olds-8715.html save your $
Fuel Pressure Regulator https://www.jegs.com/i/Holley/510/12...EaAnnlEALw_wcB
Cam Snout Extension https://www.hughesengines.com/Index/...0&partid=22194 this is for mechanical fuel pumps, Magnum timing chain covers don't have these
Cam https://www.compcams.com/thumpr-227-...r-273-360.html hydraulic roller that will work with both la/magnum "note you will need new roller lifters"
Distributor conversion kit- https://www.scramspeed.com/products/...ck-magnum.html this is fine, you have options for ignition, Might opt for MSD6A
Heads https://allcoastautos.com/dodge/new-...eads-pair.html some of the EQ heads and when they where made/prepped by are better than others
vacuum booster no link
Thread Starter
|
Veteran
Joined: Jun 2020
Posts: 269
Likes: 9
Okay so the original plan was to make the LA Style Cams work on the magnum motor. So https://www.compcams.com/big-*****-t...r-273-360.html what do i have to do to make this cam work? What needs changed.
Thread Starter
|
Veteran
Joined: Jun 2020
Posts: 269
Likes: 9
Okay all of the plans changed. I just got my hands on a 5.3 LS. So thats going to go in the truck. If you all have any questions about that go ahead and ask but i no longer need help on this thread thank you all tho.