I hope this isn't a dumb question, but can someone tell me how to set the clock function on my '97 Ram's audio system. It's a factory single CD system. There's a rocker that's labeled H(our)/M(inute), but it seems that another button or two must be pressed to set the clock. I purchased the truck used, and don't have the factory manual, so any help will be much appreciated.

John in SW Ohio

 

should be 2 very small buttons. i used my knife to adjust the time. maybe a pen tip or pin will also work.

 

all you do is get a pen or a toothpick and press on the lil buttons that are pushed in to adjust the time...

 

What he said......one more tip - I have to push the button twice to get the numbers to start moving

 

Thanks, guys. My clock is now showing the correct time. I never noticed the little holes for setting the clock, since the H(our) and M(inute) legends were next to the rocker switch, I assumed that the rocker was used to set the time. Thanks again for the good info.

John in SW Ohio