So after scanning my 2001, dodge ram 1500 I came up with ABS codes 45, 47,46 but haven’t been able to find a lot of information on what the issue is even though I’m assuming it might just be a requirement of me to replace the ABS module ?

 

Does your truck have 4 wheel or rear wheel ABS? Regardless, the codes should be in the service manual, I believe in the brake section with the ABS info - You can download a copy for your year truck here - https://dodgeforum.com/forum/2nd-gen...e-manuals.html

 

so I’m trying to see if I can find a used ABS module but I’m not sure which number I need to make sure I match because there’s four numbers on the body one sticker says C1H95HO / 13451521 – D

and the other says P52010075AE / TXXBU114180854

 

Does your truck have 4 wheel ABS or just rear wheel ABS?

 

Since I do not see any wires going to the front wheels, I would have to say it’s a two wheel ABS

 

Is your truck 2WD or 4WD? You should be able to generate a build sheet showing your truck's options via this link - https://fcagroup.my.site.com/RAM/s/equipment-listing

I'm curious, as two of the codes seem to elude to issues with the left front of the truck, which would seem to say that your truck has 4 wheel ABS...

 

I don’t see anything on that bill sheet that says anything regarding ABS

And yeah, I know it says left front but I don’t see any wiring that goes to the front wheels

 

Is your truck 2WD or 4WD?

 

It’s a 1500 SLT Laramie. 5.9 gas. 4wd

 

If the truck has 4 wheel ABS, you can check the front axles behind the U-joint. There would be front wheel sensors to monitor the spinning axles. The front axle with ABS should have a tone ring on it like shown in the attached photo.

The part number you mentioned (P52010075AE) can be easily be searched via Google. By typing in "Mopar P52010075AE" I come up with this - https://www.ebay.com/itm/144524341511