When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
If you didn't touch the distributor, then the only way the timing could change, is if the chain slipped.....
I just don’t know how that could have happened, it’s a brand new chain and gear set. Besides cylinder #8 chewing on a bolt it ran totally fine prior to me taking it apart.
I assume you removed the head to do the piston work. Did you get all the push rods/rockers in correctly? Triple check the firing order. Are the plugs good, not fouled?
I assume you removed the head to do the piston work. Did you get all the push rods/rockers in correctly? Triple check the firing order. Are the plugs good, not fouled?
looking at that diagram, i think i may have connected my plug wires to my dizzy not in the firing order but 1-2-3-4 etc must have been tired haha, i need to go verify but im quite positive. thank you
looking at that diagram, i think i may have connected my plug wires to my dizzy not in the firing order but 1-2-3-4 etc must have been tired haha, i need to go verify but im quite positive. thank you
must have been tired haha, i need to go verify but im quite positive. thank you 
