When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
Delco of denso for pumps, and make sure you have the 3/8ths quick release tool for the line. Shouldn't need any connectors, unless you break one on removal.....
So I ended up ordering a new filler neck as mines gotten pretty roached And a new Delphi fuel pump.
I really would’ve liked to have picked a better brand option but price was definitely a factor, but I did hear that this brand pump is respectable compared to others.
Yeah, luckily mine hasn’t gotten that far yet but the guy who owns my truck originally must’ve been backing up. A lot of boats or going through saltwater. So I have a reasonable amount of rust unfortunately. I really need to find a way to repair the two points where the chassis meets the front of the bed better because they’re rotten which I feel like might’ve contributed to the fuel pump issue and I dont really have the time or the ability to replace the entire crossmember at the moment
So after six hours, I was able to change out my fuel pump and I was able to temporarily block up one side of my bed as my front supports have rotted out
But I still noticed that the crossmember still sits on top of the fuel pump has anybody had this kind of problem?
I contributed this low placement to the fact that my left and right bed mounts are rotten
I was able to add some wood on the right side, but I haven’t been able to do the same on the left just yet because I cannot remove the bolt and unlike the right side, which was completely rotten, but I couldn’t get the bolt out. I was able to notch fit it
if anyone has any insight on what I can do to strengthen these two week points on both sides in the meantime until I can work on the replacement kit for the crossmembers
Last edited by Mneukirch86; 08-12-2024 at 09:29 AM.