where is cam sensor
#1
#3
RE: where is cam sensor
The whole distributor? It's not under the cap or rotor? If thats the case I'm screwed, I can't set the timing worth a crap!! The engine light came on a week or so ago, I disconnected the battery and cleared it, while sitting in traffic for about 3 min it came back on. I tried to clear it again but it comes right back on. It runs fine with no lose of power. Any help would be greatly appreciated.
Thanks
Thanks
#4
#5
#6
RE: where is cam sensor
Hell, with that body lift you oughta be able to walk right in there and git it done. Take the plugs out, and manually crank the motor to TDC. In this position the rotor will be pointing to the cylinder one hole on the distributor. Remove the distributor, replace the sensor, and, when you put it back, make sure the rotor is pointing to the cylinder one hole.
#7
Trending Topics
#8
RE: where is cam sensor
Front driver's side is #1 cylinder. If you look on the intake manifold it will have the cylinder numbers and the firing order. If you have a high speed internet connection, go to the sticky at the top of this forum that says "merry christmas guys". There is a service manual that you can download that has diagrams of cylinder and distrbutor orientation.
The manual is for a 2001, but what you are looking at will be the same.
The manual is for a 2001, but what you are looking at will be the same.
#9
#10