2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

318 Camshaft?

Old Sep 25, 2006 | 08:47 PM
  #1  
junkman306's Avatar
junkman306
Thread Starter
|
Veteran
Joined: Sep 2006
Posts: 297
Likes: 0
From: Sparta
Default 318 Camshaft?

Whats the best aftermarket cam for a 95 ram 1500 318 auto? Are all of them smooth idle? I was looking at an xtreme energy cam, but they all say smooth idle. I want performance, but I love the sound of a thumpin motor.
 
Reply
Old Sep 25, 2006 | 11:31 PM
  #2  
The Burning Rom's Avatar
The Burning Rom
Record Breaker
Joined: May 2005
Posts: 2,415
Likes: 0
From: Wisconsin
Default RE: 318 Camshaft?

Problem with a "thumpin" motor is that you have to upgrade a lot of other components, and you have to TUNE your truck very well...or your motor won't last long The lumpier your idle gets, the more your gas mileage will go down the toilet as well

Your best bet is this crane cam: CRN-704121

It's the EXACT same cam as the Mopar Performance Camshaft that was available a few years ago. That cam has been known to wake up stock motors quite nicely, and still retain street manners. It's also important to know that NEW lifters are STRONGLY recommended when doing ANY cam swap.
 
Reply
Old Sep 26, 2006 | 12:07 AM
  #3  
junkman306's Avatar
junkman306
Thread Starter
|
Veteran
Joined: Sep 2006
Posts: 297
Likes: 0
From: Sparta
Default RE: 318 Camshaft?

True I just like the sound. You'd be crazy to swap a cam and not get new lifters. I'll probably get new springs if I ever get around to swapping a cam.
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 11:19 AM.