318 Camshaft?
#1
09-25-2006, 08:47 PM
Join Date: Sep 2006
Location: Sparta
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
#2
09-25-2006, 11:31 PM
Record Breaker
Join Date: May 2005
Location: Wisconsin
Posts: 2,415
Likes: 0
Received 0 Likes
on
0 Posts
RE: 318 Camshaft?
Problem with a "thumpin" motor is that you have to upgrade a lot of other components, and you have to TUNE your truck very well...or your motor won't last long 
The lumpier your idle gets, the more your gas mileage will go down the toilet as well
Your best bet is this crane cam: CRN-704121
It's the EXACT same cam as the Mopar Performance Camshaft that was available a few years ago. That cam has been known to wake up stock motors quite nicely, and still retain street manners. It's also important to know that NEW lifters are STRONGLY recommended when doing ANY cam swap.
The lumpier your idle gets, the more your gas mileage will go down the toilet as well Your best bet is this crane cam: CRN-704121
It's the EXACT same cam as the Mopar Performance Camshaft that was available a few years ago. That cam has been known to wake up stock motors quite nicely, and still retain street manners. It's also important to know that NEW lifters are STRONGLY recommended when doing ANY cam swap.
#3
09-26-2006, 12:07 AM
Join Date: Sep 2006
Location: Sparta
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
