2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

hub bearing

Thread Tools
 
Search this Thread
 
Old Nov 15, 2006 | 11:25 PM
  #1  
Darren's Avatar
Darren
Thread Starter
Joined: Nov 2005
Posts: 21
Likes: 0
Default hub bearing

Hey guys who knows if the right and left hub bearing on a 99 ram 1500 4x4 are the same parts. I want to swap my left and right to see if it eliminates a noise i am hearing thanks
 
Reply
Old Nov 15, 2006 | 11:59 PM
  #2  
DieselDemon's Avatar
DieselDemon
Record Breaker
Joined: Feb 2005
Posts: 1,325
Likes: 1
From:
Default RE: hub bearing

It may make a difference if you have 4 wheel antilock. My guess would be the sensor/magnet (whatever the setup is) might not be in timing if they swap sides?

Good luck.
 
Reply
Old Nov 16, 2006 | 12:08 AM
  #3  
Darren's Avatar
Darren
Thread Starter
Joined: Nov 2005
Posts: 21
Likes: 0
Default RE: hub bearing

I should of stated that my ram is non abs on the front, thanks
 
Reply
Old Nov 16, 2006 | 06:04 AM
  #4  
kikidbird's Avatar
kikidbird
Veteran
Joined: Apr 2006
Posts: 265
Likes: 0
From: Los Angeles
Default RE: hub bearing

Yes it is the same part for the left or right. The only difference between the ABS is the magneto sensor. I have traveled from Los Angeles to Rapid City and my wheel hub bearing gave out twice. Now I cary a new set just in case.
 
Reply




All times are GMT -4. The time now is 05:24 PM.