image_zps61da66ed.jpg
Here is what I received for the rear end... Didn't have any real issue for the back, knocked it out in half a day

image_zps88f5c4cc.jpg
Stock rear shock absorber versus new rancho

image_zps57a7ebb2.jpg
Don't mind the rust just making room for the lifting blocks

 

image_zpsbd0c778f.jpg
One installed and blocks on, took a bit of work as I assumed to get the lined back up
image_zps44548835.jpg
Both on, last thing todo for the rear was installing the parking brake spacer bracket
image_zps4f3a55ea.jpg
image_zpsc82e0ffd.jpg
Had to drill two holes for installation

 

Nice, keep those pictures coming. Looking forward to seeing it completed.

 

image_zpsfa51085c.jpg New wheels that will be going on if I ever finish... Tires come in today

 

I can't thank you enough for a picture thread on the lift kit install. It has seemed like a mythical thing to want, so far...
What size tires are you going with?

 

33" bf Goodrich KM2s

 

thanks for making this thread! keep it updated with pics

 

Been running into some issues lately with the front and and the rust. just like ohsixdakota I had to cut the cambolts to get them off. To bad they are backorder nationwide right now. I'll post pictures when i can!

 

image_zps23573f4a.jpg

Just a sneak peek till I get more time for the whole upgrade... Ran into so many rust issues had to replace a lot on my truck

 

image_zpsd42098e2.jpg

This was everything originally came with JMR or I had purchased to put on the front end... Ended up buying new upper control arms, lower control arms, differential mounting, cam bolts, custom brake lines and leaf spring alignment bolts...