Odometer Error
Section Moderator
Joined: May 2012
Posts: 1,564
Likes: 9
From: Concord, CA
I don't know any shops that buy their parts off of ebay. And I know the labor rate around here is $125-150 an hour. So, if you figure dealership list pricing on the cluster and an hour labor, it wasn't really out of line at all.
Believe he means the price is typical for a stealership and way out of line considering you could get a used on off ebay for that price and do it yourself.
Welcome to DF. You should start your own thread. You will get more traffic and visability to your question that way.
Registered User
Joined: Jan 2013
Posts: 2
Likes: 0
My 2005 Dakota same error - -I did the test holding down reset button -turn key on-release reset button and test began went thru 7 steps with tach and speedometer displaying readings at each step for one example -speedometer at 30 and tach at 2 which I read as 32 ? At end of test, odometer read 50600 then went back to error. The milage shown was not my last milage. Is this an error code ?? Also, anyone know how hard it is to remove the inst. cluster?? Also where the odometer input signal comes from, the tranny? or wherever? Any info appreciated
Champion
Joined: Aug 2009
Posts: 3,971
Likes: 91
From: Jersey
My 2005 Dakota same error - -I did the test holding down reset button -turn key on-release reset button and test began went thru 7 steps with tach and speedometer displaying readings at each step for one example -speedometer at 30 and tach at 2 which I read as 32 ? At end of test, odometer read 50600 then went back to error. The milage shown was not my last milage. Is this an error code ?? Also, anyone know how hard it is to remove the inst. cluster?? Also where the odometer input signal comes from, the tranny? or wherever? Any info appreciated
That may or may not eliminate the error code.
Thread
Registered User
Joined: Mar 2014
Posts: 4
Likes: 0
odometer error
My 2005 Dakota same error - -I did the test holding down reset button -turn key on-release reset button and test began went thru 7 steps with tach and speedometer displaying readings at each step for one example -speedometer at 30 and tach at 2 which I read as 32 ? At end of test, odometer read 50600 then went back to error. The milage shown was not my last milage. Is this an error code ?? Also, anyone know how hard it is to remove the inst. cluster?? Also where the odometer input signal comes from, the tranny? or wherever? Any info appreciated
Did you ever find the solution to this? I have the same problem
Registered User
Joined: Mar 2014
Posts: 4
Likes: 0
odometer error
After starting my 2005 dakota this morning i recieved an error message on my odometer. No check engine light, or anything else seemed wrong. It seems to run just as good, with no apparent reason for the error. I recieved no error codes when attempting to get them. Has anyone else had any of the same problems and if so how have you resolved them? Is there anyway to do a reset and see if this clears the error message?
Any help would be appreciated, if the error doesnt correct itself i'll have to run down to the dodge dealer and have them give it a look over, so far they've said just to look it over it'll cost over a hundred bucks, so hopefully it wont come to that. This poor school boy cant afford that :P
Any help would be appreciated, if the error doesnt correct itself i'll have to run down to the dodge dealer and have them give it a look over, so far they've said just to look it over it'll cost over a hundred bucks, so hopefully it wont come to that. This poor school boy cant afford that :P
