2010 Mod List
Thread Starter
|
Grand Champion
Joined: Apr 2009
Posts: 5,293
Likes: 3
From: Kekaha, HI
2010 Mod List
Just curious what mods everyone is planning in the upcomming year? I'll throw mine up first. Right now ASP Racing is building me a cog setup for my blower. With my current belt and pulley setup to keep 14psi I have to keep the belt tight. With the new cog setup it won't be an issue.
Next set of mods after the Cog
APS Precision 3000 Stall Converter
Sharadon Stage III Tranny Valve Body
Rawtek Air to Water intercooler
224 Blower Cams/Beehive Valve Springs
Next set of mods after the Cog
APS Precision 3000 Stall Converter
Sharadon Stage III Tranny Valve Body
Rawtek Air to Water intercooler
224 Blower Cams/Beehive Valve Springs
Professional
Joined: Jan 2009
Posts: 210
Likes: 1
I'll toss in my list:
EDIT: Gotta change it up a little bit. I'm on a mission this year.
1. Go lower with rear lowering shackles.
2. Pull out the over load leaf.
3. Cut the front springs by one coil. Hate to do that but have no choice.
4. 20x9 SRT-10 wheels
5. 275x45x20 front and 295x45x20 rear tires
6. Rework exhaust so there is no drone. Probably go with dual 2.25" with cross over and Walker mufflers to quiet it down some.
7. Get 4.10's installed front and rear.
8. SC 3865
9. Get a better CAI.
EDIT: Gotta change it up a little bit. I'm on a mission this year.
1. Go lower with rear lowering shackles.
2. Pull out the over load leaf.
3. Cut the front springs by one coil. Hate to do that but have no choice.
4. 20x9 SRT-10 wheels
5. 275x45x20 front and 295x45x20 rear tires
6. Rework exhaust so there is no drone. Probably go with dual 2.25" with cross over and Walker mufflers to quiet it down some.
7. Get 4.10's installed front and rear.
8. SC 3865
9. Get a better CAI.
Last edited by spshultz; Dec 3, 2009 at 09:41 AM.
Record Breaker
Joined: Sep 2006
Posts: 1,587
Likes: 2
From: Omaha NE
Since I'm not paying taxes this year (hehe) I am unloading in 2010.
1. Revamped flowmaster exhaust, cat to flowmaster to tip in front of rear wheel (side)
2. either 4.10 gears Or cams (if availiable)
3. *maybe* some new shoes n socks.... or tires and wheels.
4. rewire my 10"sub
5. custom bed stripes to replace 4x4 sticker
6. remove the massive dents I got while offroading in kansas lol...$1100 easy
7. either custom flash or work on my own SC 3865
8. Stubby antennae (+2 hp)
9. NiteRunner headlights
10. spray on bedliner
11. get one o' them bed extender doohickies and some bed straps (I help people move off base a lot)
12. sneak into Blown's garage and transfer his blower to my engine. Once I figure out where he lives in my town *creepy laugh*
13. E-fan finally
1. Revamped flowmaster exhaust, cat to flowmaster to tip in front of rear wheel (side)
2. either 4.10 gears Or cams (if availiable)
3. *maybe* some new shoes n socks.... or tires and wheels.
4. rewire my 10"sub
5. custom bed stripes to replace 4x4 sticker
6. remove the massive dents I got while offroading in kansas lol...$1100 easy
7. either custom flash or work on my own SC 3865
8. Stubby antennae (+2 hp)
9. NiteRunner headlights
10. spray on bedliner
11. get one o' them bed extender doohickies and some bed straps (I help people move off base a lot)
12. sneak into Blown's garage and transfer his blower to my engine. Once I figure out where he lives in my town *creepy laugh*
13. E-fan finally
Last edited by trucky; Nov 22, 2009 at 08:14 PM. Reason: forgot one
All Star
Joined: Dec 2008
Posts: 837
Likes: 0
From: Ontario, Canada
