hmm, take a look at this link...
Thread Starter
|
Veteran
Joined: Apr 2010
Posts: 306
Likes: 0
From: Cincinnati, OH
hmm, take a look at this link...
Is this basically the power wire mod? Sounds a little fishy...
http://www.performancechipsdirect.com/
http://www.performancechipsdirect.com/
Guest
Posts: n/a
it looks like they made an adjustable power wire mod. all that **** does is alter the ohm load allowing you to "dial in" the right ohm load to trick the computer.
the power wire is easy...
you need a 4.7k ohm resistor. place it in the green wire off the IAT, between the sensor and the ecu. anywhere in the wire will be fine. bam! now your ECU thinks its 20 degrees colder outside, adjusting fuel maps and ignition timing.
the power wire is easy...
you need a 4.7k ohm resistor. place it in the green wire off the IAT, between the sensor and the ecu. anywhere in the wire will be fine. bam! now your ECU thinks its 20 degrees colder outside, adjusting fuel maps and ignition timing.
Thread Starter
|
Veteran
Joined: Apr 2010
Posts: 306
Likes: 0
From: Cincinnati, OH
Thread Starter
|
Veteran
Joined: Apr 2010
Posts: 306
Likes: 0
From: Cincinnati, OH
Some of the other posts looked a little more involved than just putting this inline on the wire. Do I need to do the other stuff (heat shrink, spade couplers etc.) or can I just wire it straight in? (wire-resistor-wire)
Trending Topics
Thread Starter
|
Veteran
Joined: Apr 2010
Posts: 306
Likes: 0
From: Cincinnati, OH
Power wire picture? please...
Can someone post or direct me to a picture of the power wire? When I look in the sticky at Greythangs post his picture links come up like this:
[IMG]local://upfiles/40810/D6EEA9EEEE0E4BFC950D5A8C1B9823FF.jpg[/IMG]
[IMG]local://upfiles/40810/C45C960AD5A443EBBF23D1B92F7ABE3D.jpg[/IMG]
(no link)??? Hate to ask, I did search.
[IMG]local://upfiles/40810/D6EEA9EEEE0E4BFC950D5A8C1B9823FF.jpg[/IMG]
[IMG]local://upfiles/40810/C45C960AD5A443EBBF23D1B92F7ABE3D.jpg[/IMG]
(no link)??? Hate to ask, I did search.