2010 V8, Let the mods begin!
Thread Starter
|
Professional
Joined: Apr 2011
Posts: 109
Likes: 0
From: Central Ohio
rengnath hit it. This had to go:
DSC_2119.jpg
Welding it up (not me):
DSC_2121.jpg
The green Neon visable has run 10.56 @136..04 in the 1/4 mile, driven by the guy welding.
I put on a Borla 14", and a Moroso Spiralflow in place of the stock muffler and reasonator. We kept the clamp forward of the resonator, everything else is welded. I (um, mostly the wife) wanted to keep it quiet. It's very low and deep below 2K, above 3.5K it's nasty! No clip today, it's still raining here. First chance on a clear day, I'll take a video.
For those of you doing an exhaust, the resonator pipe is 2.75". We had to be creative to get the 3" ID Spiralflow to fit. The muffler pipe is a little smaller than 3", but larger than 2.75" also. Jon won't do "slag welds", so again we got creative.
DSC_2119.jpg
Welding it up (not me):
DSC_2121.jpg
The green Neon visable has run 10.56 @136..04 in the 1/4 mile, driven by the guy welding.
I put on a Borla 14", and a Moroso Spiralflow in place of the stock muffler and reasonator. We kept the clamp forward of the resonator, everything else is welded. I (um, mostly the wife) wanted to keep it quiet. It's very low and deep below 2K, above 3.5K it's nasty! No clip today, it's still raining here. First chance on a clear day, I'll take a video.
For those of you doing an exhaust, the resonator pipe is 2.75". We had to be creative to get the 3" ID Spiralflow to fit. The muffler pipe is a little smaller than 3", but larger than 2.75" also. Jon won't do "slag welds", so again we got creative.
Last edited by TomZ; Apr 22, 2011 at 04:36 PM.
