Lowering Shackles direction?
Check out the Raider pic I posted in general if you haven't already. I'd kill for kits that would get a stance like that.
My rust situation is fine, but the underside of your truck still makes me jealous. Mine are facing the right direction, but there is no discernible difference between left and right. Mine were the CanuckMotorsports version.
Supposed to be 2 inches, it looks it from behind and when standing next to it, but harder to tell by looking at the wheel wells alone. (i didn't measure prior to install) You could fab some extentions to it that would make the shackle longer, about an inch or so before it would touch the bed. But at that angle, the amount of drop you would get from a longer shackle would minuscule. I bet a 1.5" longer shackle would only give a half inch drop. Removing a leaf or ditching the shackles and relocating the axle would give a more dramatic drop.
Check out the Raider pic I posted in general if you haven't already. I'd kill for kits that would get a stance like that.
My rust situation is fine, but the underside of your truck still makes me jealous. Mine are facing the right direction, but there is no discernible difference between left and right. Mine were the CanuckMotorsports version.
Check out the Raider pic I posted in general if you haven't already. I'd kill for kits that would get a stance like that.
My rust situation is fine, but the underside of your truck still makes me jealous. Mine are facing the right direction, but there is no discernible difference between left and right. Mine were the CanuckMotorsports version.
oh and also its 70 degrees here right now.. im walking around in flip flops.
ENVY MEE
Last edited by cheeseburger; Dec 15, 2011 at 12:14 PM. Reason: gloating.
I got mine from BAdassR/T, his old set. He got his from canuckmotorsports. I know you are interested in lowering, just pm me and I'll send you all the links and info I've gathered since I started looking into it myself







