Originally Posted by Reject

Monroe Load-Adjusting Shocks 58650, Are sold in Pairs (Rear)
I heard Monroe and Rancho are the owned by the same company.

I have the 58650 Install on my 05 Dakota
I forgot to measure the change in height before and after the swap. But it seems around a inch or so.

I have only towed a small trailer since I installed them, Have not hauled anything heavy either.

I did move a Cable Spool Trailer at my work, which was about 2500lbs on a pintle hitch, and the truck dropped about a inch


Edit: I compressed them into place with a floor jack, Pass side one was a pain tho

Originally Posted by sleds

Exhaust, I have a Magnaflow on and it has a nice rumble to it. If I had the money, the one to look at seriously is the Borla.

Originally Posted by JoeyDMG

Reject, did you have any issues with the coil overs interfering with the cable going across the frame near the driver's shock? I know some people are worried about cutting it and I haven't driven it enough to say.

Originally Posted by 06Dak4.7Silver

I cut the mounts for that cable and repositioned it and zip tied the cable to a better location on the frame so it did not rub off the coilover..I don't think it is something to be too concerned over but it is a good precaution to take!

Originally Posted by geofft225

funny, where is says what others bought along with the superchips tuner from amazon there are some magpul folding rear sights?