3rd Gen Dakota 2005 - 2011 Dodge Dakota Tech - The ultimate forum for technical help on the 3rd Gen Dakota.

change tranny fluid and filter

Old Nov 17, 2018 | 06:41 PM
  #1  
df1995's Avatar
df1995
Thread Starter
|
Registered User
Joined: Nov 2018
Posts: 1
Likes: 0
Default change tranny fluid and filter

I have a 2007 Dakota with about 80,000. I would appreciate advice about whether it might be a good idea to change the transmission fluid and filter after these 10 years of use. No transmission problems, just concerned about wear. I have the TOW package so there's a transmission cooler. TIA (note earlier draft said "town" package instead of the correct TOW)
 

Last edited by df1995; Nov 18, 2018 at 04:54 PM.
Reply
Old Nov 17, 2018 | 06:52 PM
  #2  
primem's Avatar
primem
Record Breaker
Joined: Apr 2013
Posts: 1,815
Likes: 56
From: Alberta
Default

if it was mine...I would. trans fluid has a life. I follow the severe service interval in the maintenance schedule...most people fall into that category but think they don't. If you live in a hot climate...that's severe service.
 
Reply
Old Nov 18, 2018 | 07:57 AM
  #3  
jkeaton's Avatar
jkeaton
DF Admin
15 Year Member
Photogenic
Photoriffic
Liked
Joined: Apr 2010
Posts: 28,212
Likes: 366
From: Winston Salem, NC
Default

I be,ieve the recommended is 60k. I had mine done even though mines a street driven vehicle. Use OEM filters only. These trucks do not like aftermarket filters.
 
Reply
Old Nov 18, 2018 | 10:10 AM
  #4  
RicOshea's Avatar
RicOshea
Rookie
5 Year Member
Photogenic
Joined: Jul 2018
Posts: 97
Likes: 12
From: Sauble Beach, Ontario
Default

Sounds like good advice, I too recently purchased a '06 Dakota in July with 100,000 and I'm not sure how good the previous owner was about scheduled service maintenance. I do notice a little slop in the gear selection and gear shifts are noticeable when driving. Was wondering if that was linkage or something more. I've heard of a Transgo Shifter Kit solving many of the spring issues with it's beefier backing plate. Is it required to remove the cross member to access the bolts on the transmission pan? If so, sounds like a real pain without a proper lift.
 
Reply
Old Nov 23, 2018 | 07:29 AM
  #5  
philipat's Avatar
philipat
Veteran
5 Year Member
Photogenic
Joined: Nov 2016
Posts: 391
Likes: 51
Default

@RicOshea: this might help:
 
Reply
Old Nov 23, 2018 | 02:32 PM
  #6  
Seventime's Avatar
Seventime
Rookie
Joined: Apr 2018
Posts: 83
Likes: 0
Default

Great video!! Thanks for sharing!
a jack under the t case is all you need. No pain at all
 
Reply
Old Nov 23, 2018 | 03:41 PM
  #7  
19dhyer's Avatar
19dhyer
Amateur
Joined: May 2018
Posts: 35
Likes: 0
From: Utah
Default

If you get a transmission pan from a certain durango its the same fit but they have a drain bolt
 
Reply
Old Nov 23, 2018 | 06:21 PM
  #8  
Seventime's Avatar
Seventime
Rookie
Joined: Apr 2018
Posts: 83
Likes: 0
Default

But you couldn’t get the filters.
 
Reply
Old Nov 26, 2018 | 07:29 AM
  #9  
northgator8's Avatar
northgator8
All Star
Joined: Aug 2011
Posts: 759
Likes: 18
From: Ottawa, Ontario Canada
Default

Originally Posted by Seventime
But you couldn’t get the filters.
But you can get all the fluid out without dumping it down the back of your neck, then you can pull the pan and get the filters.
 
Reply
Old Nov 26, 2018 | 10:36 AM
  #10  
Seventime's Avatar
Seventime
Rookie
Joined: Apr 2018
Posts: 83
Likes: 0
Default

Originally Posted by northgator8
But you can get all the fluid out without dumping it down the back of your neck, then you can pull the pan and get the filters.
i got ya. I wouldn’t go out f my way to get the Durango one. But when I come across one at work I’ll rip it off
 
Reply

Thread Tools
Search this Thread

All times are GMT -4. The time now is 07:59 AM.