Hi Guys,
I just placed an order for a 2013 Durango Crew, and since I have about 8 weeks, I want to start ordering some accessories. I am looking into getting front/rear weather tech mats and the vent visors. Most of the accessories I see are for 2011/2012. My questions is, are there differences between the 2011/2012 and 2013? My guess is that companies have not had a chance to test fit their products in the 2013 and that is the reason why it is not listed as being compatible.
I just placed an order for a 2013 Durango Crew, and since I have about 8 weeks, I want to start ordering some accessories. I am looking into getting front/rear weather tech mats and the vent visors. Most of the accessories I see are for 2011/2012. My questions is, are there differences between the 2011/2012 and 2013? My guess is that companies have not had a chance to test fit their products in the 2013 and that is the reason why it is not listed as being compatible.
Rookie
Your selected accessories should be fine. I installed the WT visors on my D and they look great. A friend purchased the WT slush mats for his D and they fit well.
Registered User
Quote:
HTH,
IndyDurango
Negative! The 2013 has 2 hold downs for the passenger floormat and the previous models only have 1. I ordered the Weathertech floor liners for a 2012 and had to remove the 2 hold downs so that the passenger side would fit.Originally Posted by IndyDurango
Mats and vent visors will be identical. HTH,
IndyDurango
Looks like your right about the retaining clips...although some sites are advertising that the weather tech mats fit 2011 to 2013...I wonder if weather tech will develop mats for the 2013...
Champion
Like I said, the aftermarket mats are going to be identical 2011-2013. It is the Durango that is different. Very unlikely they are going to retool to adapt a mat that already fits to works in addition to the new clips. Just remove them or work around them.
Gen1 98-00s have always had to usually remove the stocker drivers side hook to get any weather mat brand to fit. Nothing new there.
Gen1 98-00s have always had to usually remove the stocker drivers side hook to get any weather mat brand to fit. Nothing new there.
Champion
Quote:
Gen1 98-00s have always had to usually remove the stocker drivers side hook to get any weather mat brand to fit. Nothing new there.
+1... btw my '12 R/T has a single clip on the drivers side only, what year is the truck pictured?Originally Posted by IndyDurango
Like I said, the aftermarket mats are going to be identical 2011-2013. It is the Durango that is different. Very unlikely they are going to retool to adapt a mat that already fits to works in addition to the new clips. Just remove them or work around them.Gen1 98-00s have always had to usually remove the stocker drivers side hook to get any weather mat brand to fit. Nothing new there.
Quote:
The difference is between the 11/12 and 2013...Originally Posted by CMil527
+1... btw my '12 R/T has a single clip on the drivers side only, what year is the truck pictured?
Ive got about 8 weeks before the 2013 is built, I guess if they dont have updated liners by then, I'll get the other ones and remove the clips...thanks guys.l..
Registered User
I spoke with someone at WT a few weeks back. They are making mats for the 13 they will be different to fit from the factory and they hope to have them released this month (from what I was told) HTH