Data Loggers

 
Thread Tools
 
Search this Thread
 
Old Jul 13, 2011 | 08:44 PM
  #871  
classified_123's Avatar
classified_123
Registered User
Joined: Jun 2011
Posts: 4
Likes: 0
From: ontario canada
Default

i have a 4door QC 5.7 4x4 also i did 1/4 mile in 15.65 i believe,, . im not sure the flashpaq is in my truck.. but ill post up my time when i figure out how to put pics of my truck also.
 
Old Jul 13, 2011 | 09:16 PM
  #872  
classified_123's Avatar
classified_123
Registered User
Joined: Jun 2011
Posts: 4
Likes: 0
From: ontario canada
Default

ok here it is.... 0 to 70 mphtimes,, 0to40-3,85sec ...0to50-5.31sec.....0to60-7.62sec......0to70-10.62sec.......and 1/4 mile......60ft-2.48sec@28mph .. 330ft-6.59sec@56mph........ 1/8-10.07@ 72mph.......1000ft-13.04 @ 83mph........1/4 mile -15.59@ 88mph.......hope thats helpfull with TM at 6 % accross the board WOT
 
Old Jul 14, 2011 | 01:19 PM
  #873  
classified_123's Avatar
classified_123
Registered User
Joined: Jun 2011
Posts: 4
Likes: 0
From: ontario canada
Default

and 3.92 gears... it feels fast for pretty much stock truck...hope you guys can post some of your times on here to compare...some of you guys have lots of mods and add-ons..but oh well.
 
Old Aug 16, 2011 | 09:43 PM
  #874  
03MopaRamman's Avatar
03MopaRamman
Captain
Joined: Feb 2010
Posts: 574
Likes: 0
From: Southern, Alberta
Default

Did a single High Elevation run after the Gear Install back in Jan and Got a 6.08 0-60 which I was pleased as that tells me I can now break into the High-Five Range with upcoming Tuning Mods planned.
Since I have 3 of 4 axles, both half shafts and front drive shaft all new I like to limit the 4HI launches to "as Required" at this point.
 
Old Aug 18, 2011 | 02:57 PM
  #875  
truckin151's Avatar
truckin151
Grand Champion
Joined: May 2006
Posts: 6,041
Likes: 0
From: Gilbert, Arizona
Default

Originally Posted by classified_123
and 3.92 gears... it feels fast for pretty much stock truck...hope you guys can post some of your times on here to compare...some of you guys have lots of mods and add-ons..but oh well.
My last run before I added a few other items I got a 0-60 in 5.4sec and 1/4 in 13.67 @ 102mph, need to wait for it to cool down before I take it out again.
 
Old Aug 18, 2011 | 04:26 PM
  #876  
SLT8's Avatar
SLT8
Record Breaker
Joined: Jun 2010
Posts: 1,115
Likes: 0
Default

^^ That's @ the track with your street trim/tires? Man that's rocking Ryan.
 
Old Aug 18, 2011 | 10:29 PM
  #877  
truckin151's Avatar
truckin151
Grand Champion
Joined: May 2006
Posts: 6,041
Likes: 0
From: Gilbert, Arizona
Default

Firebird back in April, took off the cover and tailgate and borrowed my friends DR's to get the 13.67..... Had to see what she'd do without some of the restrictions. With it in stock trim, stock tires, it was running 14.1-14.3's all night. I need to invest in some good drag tires.

the 5.4sec 0-60 was on the street on the way out to mikes one morning.
 
Old Sep 27, 2011 | 01:46 AM
  #878  
BadHazard's Avatar
BadHazard
Professional
Joined: Jul 2011
Posts: 136
Likes: 0
Default

So i did some datalogging

Something is wrong. Here are my 0-60times

9.21 every single time. with and without O/D. When i manual shift it was 9.57

I cant remember exact number but 0-50 was 6.??

What gives? Ideas?? This was with 91 tune
 
Old Jan 2, 2012 | 12:57 AM
  #879  
03whiteram's Avatar
03whiteram
Professional
Joined: Dec 2011
Posts: 119
Likes: 0
From: El Paso, TX
Default

Subscribed
 
Old Mar 16, 2012 | 07:32 PM
  #880  
itshemitime's Avatar
itshemitime
Amateur
Joined: Sep 2010
Posts: 43
Likes: 0
Default

Some nice times in here makes me rather embaressed to post mine. Ran the datalog on my 3950 and this is what I came up with. 0-60mph 7.42 sec, 1/4 mile 15.97 sec. Both runs my tires were cutting loose for about the first 3-4 seconds of the run. Pretty sure i could get in the mid 6's on 0-60 and low 15s on the 1/4 if I could ever get my damn tires to hook up. I'm satisfied considering my only mods at the moment are an advanced tranny tune and a K&N intake.
 



All times are GMT -4. The time now is 10:26 PM.