said earlier that better shocks would be best but since i replaced the bad shock this thing rides just as good as stock if not better! surprised that on shock ruin whole ride quality.. But so far i like the kit no complaints.

 

What is the max on a lift for the 2500 or mega cab before having to change other parts? i was wondering if this 5 inch kit could get another 2 inch up front and 2 to 3 inch lift leaf springs in the rear?

 

Whats up guys, been a while. I have done a few things to the Mega cab, added a edge programmer and weather tech digital floor mats and a set of 35x12.50 pro comp MT tires on my stockers. But tomorrow my new meats and shiny wheels will be installed! Can't wait!!also waiting on my train horns!!

 

Now

 

Hey CRAIG02RAM,
I just bought the 5" RC lift for my 06 MC and in the process also bought the RC carrier bearing drop kit since mine is a 2 piece drive shaft. Just wondering if yours was the same, and if so did you shim it down? Also wondering how you like the Steering stabilizer, thinking about ordering one!
Your Truck looks awesome by the way, can only hope i get similar results!

 

My driveshaft is a single shaft, it's stock as far as I know. I like the steering stabilizer, the paint or powder coat is shabby needs recoated. Thanks for comments, don't be affraid to red loctite bolts. My track bar bolt came loose. Also make shure the sleeve for drop track bar bolt is correct length inside the bracket, mine that came with kit was to small.

 

So i got the 5" RC lift on now, had it professionally put on, they said they ran into a few issues with rusty seized bolts but other than that things went pretty smooth! I have the 3" block installed in the rear which kinda gives it a little higher stance in the front. Ill probably end up throwing in some 4" blocks eventually and maybe upgrading shocks, but other than that she rides top notch so far! Now im browsing from some 18 or 20 inch rims with 35's! Heres a pic or 2 i snapped with my phone earlier, with the stock 17's and 285's!

 

I have a 2002 ram qc with a roughcountry 6 inch lift and love it i also used my stock rims with no problem no spacers needed running 37 tires only problem is when i turn sharp the rum the mudflaps but a simple fix and i have the solid arms and had no problem getting it alinged

 

Looks real good! I have the r.c 4" rear block and it leveled out perfect. Looks good, any performance mods?

 

Just a CAI right now, been eyeing up some exhausts though! Just bought some 35" trail grapplers on 17"KMC XD revolver rims, gottem for a steal, i couldnt say no! How do you like the flowmaster?
Some pics with the new rims n tires: