LED interior and tag ligthts
Veteran
Joined: Feb 2009
Posts: 351
Likes: 0
From: Indiana
idk it just said white. i think cool thou.
i havent had any flicker issues, thou did have one smd go out but i think it was because i pushed on it real hard. i did have to put a small resistor on one of the interior lights and one the the leds in my 3rd break bed lights.
i got the 6 smd for the 2 map lights and a 9 smd for the dome, 5 smd for the cargo 3rd break lights and 4 smd for the licence plate lights
i havent had any flicker issues, thou did have one smd go out but i think it was because i pushed on it real hard. i did have to put a small resistor on one of the interior lights and one the the leds in my 3rd break bed lights.
i got the 6 smd for the 2 map lights and a 9 smd for the dome, 5 smd for the cargo 3rd break lights and 4 smd for the licence plate lights
Captain
Joined: May 2009
Posts: 553
Likes: 0
From: Tallahassee, Florida
Ok I just put mine in (thanks to you) and they work great except nothing happens when you push the light to individually come on...if I turn on all 3 lights with that side **** they turn on, but if I try pressing on one of the lights with them all on, the one I press turns off...if im being too confusing ill go make a video to show you lol
Professional
Joined: Dec 2009
Posts: 185
Likes: 0
From: Wisconsin
Well don't feel like your the only one confused here. Just got mine today, and installed in like 2 minutes. However they only come on when the doors are open, or if I use the switch on the dash also. When pushing the map lights individually neither of them light up?????? They also have a constant very slight glow to them that don't shut off even when everything else is off??? Anyone else have this issue????
Veteran
Joined: Feb 2009
Posts: 351
Likes: 0
From: Indiana
Ok I just put mine in (thanks to you) and they work great except nothing happens when you push the light to individually come on...if I turn on all 3 lights with that side **** they turn on, but if I try pressing on one of the lights with them all on, the one I press turns off...if im being too confusing ill go make a video to show you lol
Registered User
Joined: Mar 2010
Posts: 5
Likes: 0
From: Mooresville
recon lights
i put the recon version in the inside and have the same problem...need to install a resistor for the map lights. not really worried about it..just bummed that i cant replace the bulbs for my brake lights. the tech from recon said that dodge has a jacked up harness and pretty much have to replace the whole thing. reverse bulbs work great and the license plate lights as well.
Professional
Joined: Dec 2009
Posts: 185
Likes: 0
From: Wisconsin
Mega black tank, do your lights work fine when the truck is off and you try to turn on your map lights? I want to figure this out before I send them back... I got mine from ebay and they look like this, it is the one with two yellow dots and the speared ends.
http://www.hidxenonlights.com/images/lednotice.jpg
http://www.hidxenonlights.com/images/lednotice.jpg