Hey guys, I know this has been brought up many many times lol. Ive done a search and cant come up with any info for my setup. So I have an 05 1500 4X4, Front end Has the torsion Bars cranked up and I have an Add a leaf in the rear. I Have the stock 20's on it. I want to know the largest tire that I can run with:

a) the way it is now
b) putting a levelling kit on (dont know if this will give more than just torsion bars
c) putting wheel spacers in

I thought about putting a lift in but I think Im going to save that for an older truck that im thinking about building. I just want bigger rubber on mine.

Thanks for the help!

 

https://dodgeforum.com/forum/3rd-gen...d-fitment.html

 

I am putting 35x12.5x20 on mine but its getting a level kit. I am told by a shop that does all dodges that a 12.5 will not rub the control arm but thats as wide as I can go without spacers ( which I don't want)

 

Okay thanks guys, Im thinking of going with a nitto trail grappler m/t in a 295 65 r20, which is a 35x11 basically so it should clear then.

Thanks again for the info!

 

Exactly what I am getting ! Post Pics when you are done so I can get an idea of what its going to look like.

 

Lol well it wont be for awhile, likely in the spring sometime. I can get a winter out of these tires, give me some more time to save up for the hole in my pocket these tires are going to cause! lol

 

Yupp they should fit. I have 35 12.50's with just a t bar crank.

 

Do the factory 20 inch rims have a different offset then the factory 17's? Just want to be certain thats all.