3rd Gen RAM general discussion/NON-tech This section is for general discussions about your 3rd gen RAM. Non tech related RAM threads belong here.

315/70/17

Thread Tools
 
Search this Thread
 
Old Feb 3, 2011 | 06:22 AM
  #1  
512RAM's Avatar
512RAM
Thread Starter
|
Amateur
Joined: Aug 2010
Posts: 38
Likes: 0
From: Rosenberg, Texas
Default 315/70/17

I have a 2008 dodge trx4 1500 with a 2.5 leveling kit. Can I fit 315/70/17 tires on the factory wheels?

Thanks
 
Reply
Old Feb 3, 2011 | 06:36 AM
  #2  
nibroc's Avatar
nibroc
Captain
15 Year Member
Liked
Joined: Jul 2006
Posts: 518
Likes: 19
From: the 'ville, kentucky
Default

yes--no problem
 
Reply
Old Feb 3, 2011 | 06:39 AM
  #3  
512RAM's Avatar
512RAM
Thread Starter
|
Amateur
Joined: Aug 2010
Posts: 38
Likes: 0
From: Rosenberg, Texas
Default

Ok thx
 
Reply
Old Feb 3, 2011 | 06:46 AM
  #4  
512RAM's Avatar
512RAM
Thread Starter
|
Amateur
Joined: Aug 2010
Posts: 38
Likes: 0
From: Rosenberg, Texas
Default

Would that be a 33in almost 34 in tire?
 
Reply
Old Feb 3, 2011 | 08:57 AM
  #5  
CaptainMason's Avatar
CaptainMason
Registered User
Joined: Jan 2011
Posts: 34
Likes: 0
From: Long Island,NY
Default

Might need a wheel spacer in the front, I did... 1/4" to keep them from rubbing the a arms
 
Reply
Old Feb 3, 2011 | 09:01 AM
  #6  
wedgeheaded's Avatar
wedgeheaded
Registered User
Joined: Jan 2008
Posts: 6
Likes: 0
Default

If you're talking about the aluminum wheels, they will rub. The chrome clad steel wheel won't rub with a small spacer. The back space is different. I'm told that a 295 70 17 is as far as you can go with out spacers on the TRX4 wheels.
 

Last edited by wedgeheaded; Feb 3, 2011 at 09:04 AM.
Reply
Old Feb 4, 2011 | 02:33 AM
  #7  
512RAM's Avatar
512RAM
Thread Starter
|
Amateur
Joined: Aug 2010
Posts: 38
Likes: 0
From: Rosenberg, Texas
Default

F it...Ill just get some cheap aftermarket wheels.

Thx guys
 
Reply
Old Feb 4, 2011 | 10:17 PM
  #8  
JMaxx93's Avatar
JMaxx93
Registered User
Joined: May 2010
Posts: 46
Likes: 0
From: Seaside, CA
Default

haha good call. I think cragar wheels from summitracing are about as cheap as it gets. I just ordered some 17X8's for $330 shipped with 4.5" backspacing.
 
Reply
Old Feb 4, 2011 | 10:45 PM
  #9  
mark70669's Avatar
mark70669
Professional
Joined: Nov 2010
Posts: 140
Likes: 1
From: Albuquerque NM
Default

Just put a set on last weekend. Worked out great. I have about 2.5 inches of lift in the front.
 
Reply
Old Feb 5, 2011 | 03:45 AM
  #10  
512RAM's Avatar
512RAM
Thread Starter
|
Amateur
Joined: Aug 2010
Posts: 38
Likes: 0
From: Rosenberg, Texas
Default

Thx guys...the bolt pattern is 5X5.5 correct?
 
Reply



All times are GMT -4. The time now is 12:05 AM.